New Products

Steel modular van internal racking system.

Size 1000mm wide x 300mm deep x 1130mm high, complete with 4 adjustable shelves, a 130mm deep top tray and 6 adjustable dividers.

The shelves are adjustable up an down on 30mm centres, allowing the unit to be set with clearances to suit your requirements, bottom shelf can be positioned to give clearance over the van wheel boxes if required.

The dividers can be removed or repositioned as required.

Finished in powder coated light grey.

Supplied with bracketing to allow fitting of units into the van, or to join multiple units together.

Crash Tested.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

Steel van internal racking system.

This Unit is a combination of the ST1 and ST2 Racking Systems and is ideally suited for installation on the offside drivers side of a van. The overall combined length is 1960mm.

ST1 Spec:-
Unit height 1080mm.
Unit Width 975mm.
Unit Depth 280mm.
Each Shelf (internal) 960x280x100mm.
3 shelves with dividers.
Lower front brace with open bottom.

ST2 Spec:-
Unit height 1080mm.
Unit Width 975mm.
Unit Depth 280mm.
Each Shelf (internal) 960x280x100mm.
4 shelves with dividers.

Trays: 1mm mild steel with red powder coating.
Sides: 1.5mm Galvanised steel.
Dividers: 1.2mm Galvanised steel fitted into trays with removable HDPE plastic card dividers.

Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.

Please allow 5 working days for delivery.

Free delivery on all orders.

All images/pictures are for illustration purposes only.

Rhino Aluminium Pipe Carrier RP12 - 125mm Square Tube x 3 Metres Long With Locking Aerodynamic Nose Cones.

TUV SAFETY APPROVED CRASH TESTED.

This unique pipe carrier is manufactured from light but strong powder coated aluminium tubing, combined with tough aerodynamic, glass reinforced plastic end cones, to ensure minimal wind drag and maximum style.

Both end cones are fitted with keyed alike, high quality stainless steel locking mechanisms.

The practical dimensions of our Rhino Pipe Tube allow up to 54 of 15mm copper tubes to be easily transported.

Internal Dimensions:-

Width - 125mm. Height - 125mm. Length - 3050mm.

Mounting hardware supplied with this pipe carrier is suitable for use on all brands of roof bar, providing the bar dimensions are no smaller than 30mm wide x 20mm deep and no larger than 50mm wide x 40mm deep.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

Van Vault Tipper is designed for large vans and 7.5 tonne tippers to protect tools from both the elements and opportunist thieves.

The Tipper Van Vault comes complete with a sloping lid, the tipper fits neatly against the bulkhead.

External Dimensions: 488 x 1800 x 557mm (Height x Width x Depth) Weight: 90Kg.

Features 2mm sheet steel construction.
2 x paired 70mm disc locks.
Supplied with 3 keys.
Multiple reinforced fitting points
Fully phosphated anti-corrosion protection
Sloping lid to channel water away
Flush comfort grip handles

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

Price excludes VAT.

All images/pictures are for illustration purposes only.

White Flettner TCX 2 Wind Driven Van Rotating Roof Airvent.

The Flettner TCX-2 roof vent represents the very latest generation of rotary ventilators.

The TCX-2 is designed and constructed to eliminate the entry of rain, dust and downdraughts.

The unit delivers maintenance-free performance with no electrical connections to worry about, no drain on batteries and no running costs. Round the clock ventilation is provided wherever there is a slight breeze even when a vehicle is parked or where a building has no power supply.

Installation onto the roof of a vehicle or building is simple, requiring only a single locking nut fixing (included) and a 98 mm (3.9 inch) vent aperture.

Simple to fit.
State of the art manufacturing.
High quality stainless steel bearings for incredibly smooth running Tough and durable polypropylene rotor head.
Cost-effective solution to the problems of excess heat and condensation.
Supplied with shutter.
Ultra reliable No maintenance required.
Complete with fitting quide.

Colour: White.

Choice of Two Bases:-

Standard Base: (Circular - diameter 145mm / 5.75in).

Narrow Base: (Oval - width 108mm / 4.25in).

Please note: The rib patterns on the roofs of Ford Connects and Volkswagen VW T5 Transporter range of vans are such that the fitting of a Flettner ventilator should only be undertaken by a specialist fitter. We further recommend that the TCX-2 should not be fitted to smaller (car-derived) vans or to the Vauxhall Vivaro, Renault Trafic, Nissan Primastar. These vehicles should be fitted with the Flettner 2000 ventilator.

Click here to download Flettner airvent trade price list.

Click here to download Flettner Tcx2 Brochure.

Click here to download Flettner Tcx2 Fitting Instructions.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

Best Sellers

Slide Out Van Vice Holder and 4 inch Engineers Vice.

The slide out vice beam is essential for any mobile engineer or builder to comply with onsite health and safety.

The sliding arm can extend upto a meter long but still giving you a rigid platform to work on.

Price includes slide out van vice holder and 4 inch engineers vice.

All Bolts and fixings are supplied.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

Flettner 2000 Rotating Wind Driven Van Air Roof Vent Black.

The Flettner 2000 rotary vehicle vent provides round the clock ventilation for vans, buses, ambulances, 4x4s, boats and buildings.

Discrete, low-profile unit.
Tough polypropylene and glass reinforced nylon construction.
Stainless steel spindle and bearings.
Integral weather shield (prevents water ingress).
Complete with shutter.
Ultra reliable.
No maintenance required.
Complete with fitting guide.

The Flettner 2000 can be fitted to vehicles with ribbed roofs provided that the gap between each rib is at least 145mm (5.75in).

An alternative model, the Flettner TCX-2 with a narrow base option, can be fitted to roofs where the gap between ribs as small as 108mm (4.25in).

Click here to download Flettner airvent trade price list.

Click here to download Flettner 2000 Brochure.

Click here to download Flettner 2000 Fitting Instructions.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

Van Plywood Shelving Racking Pigeon Hole System.

Universal Ply wood van shelving unit, 1070mm high x 934mm wide x 360mm deep. Clearance between floor and bottom shelf is 230mm. Interlocking shelves constructed from 12mm ply for maximum strength and rigidity. Retaining lip to all compartments, much less rattles than steel shelving when on the move.

Specifications:

Constructed from 12mm Ply.

External Length 934mm.
Overall Height 1070mm.
External Width 360mm.

First Shelf 230mm from floor.

Please check dimensions quoted against where you want to position the racking in your van.

Ideal for carrying small to medium parts , easily accessible when you need them quickly.

Designed to fit over wheel arches and can be screwed or bolted together with other units.

No bolts/fixings are available or supplied.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

Van Plywood Shelving Racking Pigeon Hole System.

Universal Ply wood van shelving unit, 1070mm high x 934mm wide x 360mm deep. Clearance between floor and bottom shelf is 360mm. Interlocking shelves constructed from 12mm ply for maximum strength and rigidity. Retaining lip to all compartments, much less rattles than steel shelving when on the move.

Specifications:

Constructed from 12mm Ply.

External Length 934mm.
Overall Height 1070mm.
External Width 360mm.

First Shelf 360mm from floor.

Please check dimensions quoted against where you want to position the racking in your van.

Ideal for carrying small to medium parts , easily accessible when you need them quickly.

Designed to fit over wheel arches and can be screwed or bolted together with other units.

No bolts/fixings are available or supplied.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

The Van Vault Slider is a secure, low visisbilty floor drawer system for storing and protecting power tools in their carry cases.

The Slider is a full height floor drawer that stores 6 power tools stacked in 2 layers.

It has a 70mm disc lock and is supplied with 3 keys. It has multiple fixing points and an anti-slip top surface

Dimensions: 1201 x 500 x 302 mm (L x W x H)

Weight: 60kg

1.25mm sheet steel construction
70mm disc lock
Supplied with 3 keys
Multiple fitting points
Fully phosphated anti-corrosion protection
Steel grip handles
Heavy duty nylon rollers
Smooth drawer action
Anti-slip top surface
Reinforced top designed to take load e.g. pallet
Easy to conceal under other equipment
Floor mounts between wheel arches
Fits any commercial vehicle

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

Price excludes VAT.

All images/pictures are for illustration purposes only.

Sales Helpline: 01254 669 564

Galvanized Van Racking

Modular Van Racking | Galvanized Van Racking

Four Shelf Steel Racking Unit with Plastic Bins and Dividers VG125A

4 Shelf Steel Racking Unit with Plastic Bins and Dividers.

Dimensions : W 910mm x H 640mm to 1050mm x D270mm.

Polypropylene Removable Plastic Bin Dimensions : W 265mm x D 235 x H 80mm.

2 shelf steel racking unit consisting of 2 x 70mm deep shelves with 4 removable dividers and 2 shelves with removable polypropylene bins and cups on each shelf.

This Unit made from pre galvanized steel , fully assembled for easy fitting in about 30 mins.

Units can be stacked or bolted together. and come with adjustable legs to accommodate wheel arches.

Please allow 5 working days for delivery.

Free delivery on all orders (See Terms and Conditions).

All images/pictures are for illustration purposes only.

Price: £224.00 (Excluding VAT at 20%)
Price: £268.80 (Including VAT at 20%)

Quantity:

Professional Cnc Cut Van Plylining Kits and Van Accessories

Our Sister site Maxliner.co.uk offers Professional Cnc Cut Van Plylining Kits and Van Accessories at competitive prices.

Click here or on the picture for more details.

Saunders Van Roof Racks and Van Roof Bars

Our Sister site Vanroofracksupplies.co.uk offers heavy duty Van Roofracks and Van Roof Bars at competitive prices.

Click here or on the picture for more details.

Professional Rhino Van Roof Racks and Roof Bars

Our Sister site Roofrackproducts.co.uk provides Rhino Van Roof Racks and Roof Bars With Van Accessories.

Click here or on the picture for more details.